 Technical expertise to solve challenging sealing problems.
 Assistance with hygienic seal design and material selection for customized applications.
 Finite Element Analysis modeling to simulate seal design scenarios and functionality.

 The widest range of elastomer materials for use in food, Pharmaceutical and bioscience applications.
 Compounds to suit operating temperatures from -60°C to +260°C.
 Materials compatible with virtually all process media, fromstandard EPDM and silicones, through to Perfluoro elastomers.
 FDA Certified material is used.

 O-rings manufactured in imperial, metric and non-standard sizes from 0.25mm upto 2 meters diameter as fully moulded components.
 Larger O-rings greater than 2 meter diameter available with vulcanized joints.  Custom hygienic seals, flanges, diaphragms, pipe couplings and gaskets.
 Custom parts moulded to customer designs or VHPL recommended solutions.  Bonded components Small batch sizes and short lead-times.

The VHPL range of TC gasket seals is Specifically designed to meet the needs of pipe Couplingsin food, beverage and pharmaceutical process lines. The range of elastomer materials meets various international standards, ensuring a material for every hygienic sealing application. Engineered to deliver optimal chemical resistance to satisfy the requirements of aseptic conditions, CIP (clean-in-place)and SIP (sterilization in place)processes, VHPL seals Provide excellent longterm sealing performance, therefore extending planned maintenanceintervals and minimizing downtime. VHPL (TC Gasket) seals are manufactured to several clamp size standards conforming to current GMP (Good Manufacturing Practice) and supplied with full manufacturing batch traceability and certificates of conformity on request.

 Optimal chemical and temperature
 Resistance.Excellent long-term sealing performance.
 Available in ‘Metal Detectable’
 Parts manufactured to BS4825,
 ISO2852 and DIN32676 standardsizes.3.
 Certificates of conformity on request.

The Inflatable Rubber Seals are made from high strength FDA approved Transparent Silicone Rubber. The inflatable gaskets, rubber inflatable gaskets comply to class 21 CRF 177.2600. The seals are availed at nominal range and also provide customization in the products. Three gaskets are normally used in Fluid Bed Dryer as Inflatable Gaskets. 1. Finger Bag Sealing Gasket (50mm x 20mm) 2. Product Container Lifting i.e. P. C. Bottom Gasket (40mm x 22mm) 3. Product Container Top & Retarding Chamber i.e. P. C. Top Gasket (40mm x 22mm) These gaskets for Alliance model for GMP 60 Kgs, GMP 012 Kgs, GMP 200 Kgs & GMP 250 Kgs are readily available with us.

Very often in the food packaging industry, a cylinder with a Varying bore diameter is used in hygienic dispensing Applications. A piston operates inside the cylinder where There are small clearances and the seal interferes with the Cylinder wall .During the cleaningcycle the piston is actuatedto a region of the cylinder where the bore diameter isincreased to ensure that there is clearance between it and thecylinder bore. This allows cleaning fluids to encompass the whole of the piston assembly and seal.

VHPL Silicone tubing in platinum cured translucent is designed for a variety of pump and transfer applications including pharmaceutical, laboratory, bioprocess manufacturing and food and beverage applications. The tubes are able to withstand a high temperature of 200°C (intermittent) and are available in various internal diameters and wall thickness. Our range of 70 sizes (approx) in translucent platinum cured silicone.
Silicone Sponge Tubing can be produced with an inner diameter (ID) from 5mm up to an outer diameter (OD) of 200mm (dependant on construction, size and grade).

A Bung, Stopper Or Cork Is A Truncated Cylindrical Orconical Closure To Seal A Container, Such As A Bottle, Tube Or Barrel. Unlike A Lid, Which Encloses A Container Fromthe Outside Without Displacing The Inner Volume, A Bung Is Partially Inserted Inside The Container To Act As A Seal.

Medical-grade, platinum-cured Silicone is widely accepted in pharmaceutical and biotech applications and is often used throughout the plant. Like all of our diaphragm materials, our Silicone diaphragms meet USP Class VI and FDA 21 CFR 177.2600 standards.We provide two different finishes with our Silicone diaphragms. The first, and most common, is our white diaphragm.

With the support of talented professionals, we are passionately engaged in offering high quality Silicone Bellows. Widely demanded in the industry, the offered bellow is highly used for protecting machine parts from dust and corrosion. Keeping in mind the varied requirements of our precious clients, we make available this bellow in various technical specifications. Moreover, our respected clients can avail this from us at industry leading prices.

VHPL, offers a wide range of cords in Silicone Cords Strips And Gaskets ranging from 0.5 mm to 50 mm in Square an Round Sections. These Cords are manufactured by Step Moulding Process as well as from Microwave Continuous Curing system depending upon the customer’s requirements. Both these processes are well advanced and technologically innovate in which, the accurate dimensions, excellent finish and consistent physical properties are maintained throughout the length.